Study on Magnetic Field Distribution in Electromagnetic Ingot Casting Mold for Extra Heavy Plate

The dual-frequency electromagnetic ingot casting(DFEMIC)method with copper water-cooled ingot mold for extra heavy plate was developed.Electromagnetic field distribution in ingot mold was measured through the teslameter,the shielding effect of the copper ingot mold was judged,it is less than 37.7%of magnetic flux density when there is no ingot mold.The average shielding the magnetic field proportion of copper ingot mold reduced to 54.9%after loading「pe the magnetic yoke and adjusting its distribution.Improving electromagnetic power can increase the magnetic field strength.Using the slit combination ingot mold could help increasing magnetic flux density in ingot mold.Steel structure outside ingot mold also have interference on magnetic field distribution in ingot mold,Therefore,it is important to paid more attention to electromagnetic shielding and the uniform symmetry of system structure.