Design Optimization of Bionic Liquid Cooling Plate Based on PSO-BP Neural Network Surrogate Model and Multi-Objective Genetic Algorithm

In this study, the particle swarm optimization (PSO) and back propagation neural network (BPNN) surrogate model in combination with a multi-objective genetic algorithm are developed for the design optimization of a bionic liquid cooling plate with a spider-web channel structure. The single-factor sensitivity analysis is first conducted based on the numerical simulation approach, identifying three key factors as design variables for optimizing design objectives such as maximum temperature (Tmax), maximum temperature difference (ΔTmax), and pressure drop (ΔP). Subsequently, the PSO algorithm is used to optimize the parameters of the BPNN structure, thereby constructing the PSO-BPNN surrogate model. Next, the non-dominated sorting genetic algorithm II (NSGA-II) is employed to obtain the Pareto optimal set, and the TOPSIS with the entropy weight method is used to determine the optimal solution, eliminating subjective preferences in decision-making. The results show that the PSO-BPNN model outperforms the traditional BPNN in prediction accuracy for all three objectives. Compared to the initial structure, the Tmax and ΔTmax are reduced by 1.09 °C and 0.41 °C in the optimized structure, respectively, with an increase in ΔP by 21.24 Pa.