沥青
相容性(地球化学)
材料科学
复合材料
天然橡胶
傅里叶变换红外光谱
流变学
聚乙烯
复合数
马来酸酐
化学工程
聚合物
共聚物
工程类
作者
Yong Jin,Xin Yu,Fuqiang Dong,Shiyu Wang,Yang Jiang,Jinli Lu
标识
DOI:10.1016/j.conbuildmat.2024.136255
摘要
The reduction of mechanical properties during the desulfurization process poses a significant challenge for the widespread application of degraded ground tire rubber (DGTR). Due to its low cost and high rigidity, Polyethylene (PE) has been extensively employed to enhance the high-temperature performance of DGTR-modified asphalt. The material parameters of PE have a crucial impact on the performance of modified asphalt, but this aspect has not received sufficient attention in research. This study investigates the influence of various PE and compatibilizer polyethylene-graft-maleic anhydride (PE-g-MAH) on the high-temperature performance and compatibility of DGTR-modified asphalt. Thermodynamic analysis, basic performance tests, and rheological tests were conducted to investigate the performance of DGTR/PE modified asphalt. The compatibility was evaluated by rheological standards and microstructural phase analysis. Fourier transform infrared Spectroscopy (FTIR) tests were conducted to investigate the mechanism. The results showed that the melt flow index (MFI) value of PE has the most significant impact on the high-temperature performance and compatibility of DGTR/PE modified asphalt. Specifically, there exists an negative correlation between the MFI value of PE and the high temperature performance of DGTR/PE modified asphalt, while a positive correlation was observed with its compatibility. MDPE with the lowest MFI value can significantly enhance the high-temperature performance indicators such as G*, G*/sinδ and Jnr(τ) of DGTR-modified asphalt. However, a lower MFI value hinders the dispersion of MDPE in asphalt, leading to inadequate compatibility of the DGTR/MDPE modified asphalt. As confirmed by FTIR tests, the addition of PE-g-MAH facilitates the interaction between DGTR, PE and asphalt through chemical bonding and physical entanglement. This leads to a uniform dispersion of PE and DGTR within the asphalt, resulting in improved high-temperature performance and compatibility of DGTR/PE modified asphalt.
科研通智能强力驱动
Strongly Powered by AbleSci AI