材料科学
烧结
钕
陶瓷
微观结构
兴奋剂
铟
锌
透射率
冶金
透明陶瓷
复合数
电阻率和电导率
氧化物
复合材料
光电子学
激光器
光学
工程类
物理
电气工程
作者
Bin Wu,Bingxue Han,Benshuang Sun,Lijia Chen,Chongyang Chen,Zhijun Wang
标识
DOI:10.1016/j.ceramint.2024.04.145
摘要
Oxide targets are crucial materials for transparent conducting oxide (TCO) thin films used in optoelectronic devices. In this study, neodymium-doped indium zinc oxide (NdIZO) ceramic targets were prepared using an advanced pressureless oxygen atmosphere sintering process. By optimizing the experimental conditions, the best sintering parameters were obtained, resulting in dense, fine-grained, and uniformly microstructured NdIZO targets. The influence mechanism of different Nd doping concentrations on the phase composition, microstructure evolution, and electrical properties of the targets during the process of oxide composite powder, green body shaping, and sintering densification was analyzed in detail. The results showed that the pretreatment of the composite powder improved its dispersibility, and sintering activity. The NdIZO-2 target with an atomic ratio of Nd:In:Zn = 0.02:1:1, fabricated under optimal conditions, exhibited high density of 99.8%, low resistivity of 5.2 mΩ·cm, and an average grain size of about 3.9 μm, thereby demonstrating the best comprehensive performance. Moreover, the sputtered films prepared using NdIZO-2 targets also showed excellent properties with transmittance (T) of 88.1%, electron mobility (μe) of 31.5 cm2/Vs, and resistivity (ρ) of 7.5×10-3 Ω·cm. This work provides theoretical support for the preparation of high-quality indium zinc oxide (IZO) ceramic targets and their application in high-performance optoelectronic thin film devices.
科研通智能强力驱动
Strongly Powered by AbleSci AI