差示扫描量热法
磷石膏
扫描电子显微镜
热稳定性
表面改性
材料科学
接触角
傅里叶变换红外光谱
化学工程
X射线光电子能谱
拉曼光谱
表面能
化学
分析化学(期刊)
复合材料
色谱法
有机化学
热力学
光学
物理
工程类
原材料
作者
Xue‐Mei Yuan,Hui‐Juan Xie,Zhi‐Yu Fan,Lan Zhou,Zhu Wen,Wenliang Tao,Dengpan Nie,Yiyi Wu
标识
DOI:10.1002/slct.202300593
摘要
Abstract Phosphogypsum is widely used as a filler. However, gypsum fillers exhibit poor water resistance, compromising the performance of subsequent products. To address this issue, we modified α‐hemihydrate phosphogypsum (α‐HH) with myristic acid (ΜΑ), a low surface energy material used to prepare super hydrophobic (SHP) surfaces. The MA concentration, temperature, and modification time were optimized using a Box‐Behnken experimental design method. The surface properties, microstructure, and thermal stability of the modified powders were characterized using contact angle measurements, X‐ray diffraction (XRD), Fourier transform infrared (FT‐IR) spectroscopy, Raman spectrum, X‐ray photoelectron spectroscopy (XPS), scanning electron microscopy coupled with energy‐dispersive X‐ray spectroscopy (SEM‐EDS), and thermal gravimetry‐differential scanning calorimetry (TG‐DSC). Additionally, we discussed the hydrophobic modification mechanism of the modified α‐HH. The modified α‐HH/MA prepared with 11.0×10 −4 mol L −1 MA at 60 °C for 60 min exhibited high hydrophobicity. During modification, MA bound to the calcium ions on the surface of α‐HH to form calcium myristate, thereby forming a hydrophobic film. The thermal stability of α‐HH was improved by MA modification. The modified powder maintained high hydrophobicity even at 250 °C.
科研通智能强力驱动
Strongly Powered by AbleSci AI