Leaching Mechanism of Aluminum during Column Leaching of Ion-Adsorption Rare Earth Ore Using Magnesium Sulfate

Aluminum is a significant impurity in the ion-adsorption rare earth ore. The changes in the occurrences of aluminum have a great influence on the leaching of the rare earth ore. In this paper, the column leaching method was employed using magnesium sulfate as a leaching agent to investigate the effects of pH and magnesium sulfate concentration in the leaching agent on the leaching of aluminum and rare earths. The results show that at low magnesium sulfate concentrations, the leaching of rare earths is greatly enhanced, while the leaching of aluminum is not significantly affected by a decrease in the pH of leaching agent. At high magnesium sulfate concentrations, a slight increase in the leaching of rare earths is observed, accompanied by a significant increase in the leaching of aluminum upon decreasing the pH of the leaching agent. The leaching behavior of aluminum is related to the changes in the occurrences of aluminum during the leaching process. At low magnesium sulfate concentrations, low pH promotes the transition of Hy-Al to Sol-Al, but due to the low Mg2+ concentration in the leaching agent, Sol-Al is back-adsorbed onto the clays and transformed into Ex-Al, resulting in no significant increase in the aluminum content in the leach solution. However, at higher magnesium sulfate concentrations, aluminum in the leach solution comes mainly from the transformation of Ex-Al. Lowering the pH of the leaching agent can significantly promote the transition of Hy-Al to Sol-Al, thereby greatly increasing the aluminum content in the leach solution. The above results provide theoretical support for the optimization of the in situ leaching of ion-adsorption rare earth ore using magnesium sulfate.