Development of alginate film filled with halloysite-carbon dots for active food packaging

The development of functional bionanocomposites for active food packaging is of current interest to replace non-biodegradable plastic coatings. In the present work, we report the synthesis of an alginate-based nanocomposite filled with modified halloysite nanotubes (HNTs) to develop coatings with improved barrier properties for food packaging. Firstly, HNTs were chemically modified by the introduction of carbon dots units (CDs) onto their external surface (HNTs-CDs) obtaining a nanomaterial where CDs are uniformly present onto the tubes as verified by morphological investigations, with good UV absorption and antioxidant properties. Afterwards, these were dispersed in the alginate matrix to obtain the alginate/HNTs-CDs nanocomposite (Alg/HNTs-CDs) whose morphology was imaged by AFM measurements. The UV and water barrier properties (in terms of moisture content and water vapor permeability) were investigated, and the antioxidant properties were evaluated as well. To confer some antimicrobial properties to the final nanocomposite, the synthetized filler was loaded with a natural extract (E) from M. cisplatensis. Finally, the extract kinetic release both from the filler and from the nanocomposite was studied in a medium mimicking a food simulant and preliminary studies on the effect of Alg/HNTs-CDs/E on coated and uncoated fruits, specifically apples and bananas were also carried out.