Synthesis of phytic acid-modified chitosan and the research of the corrosion inhibition and antibacterial properties

In this study, chitosan (CS) and phytic acid (PA) were employed as raw materials to synthesize a range of chitosan-phytic acid complexes (CP) with different ratios (CS:PA = 12:1, 9:1, 6:1, 3:1, 1:1). The structures and elemental compositions of the compounds were characterized using Fourier-Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS). The thermal stability of the synthesized materials was analyzed using a Thermogravimetric Analyzer (TG). Electrochemical testing was conducted to explore the corrosion inhibition effect of the modified inhibitors with varying ratios on Q235 steel in 3.5 wt% NaCl solution. Additionally, Scanning Electron Microscopy (SEM) was utilized to investigate the surface morphology of the immersed samples. When the CS:PA ratio was 3:1, CP exhibited an impressive corrosion inhibition efficiency of 94.9 %. Furthermore, the antimicrobial properties of CP were evaluated using the colony plate counting method. At a CS:PA ratio of 1:1, CP demonstrated the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) at 0.1250 % and 0.5000 %, respectively. This research introduces a novel green corrosion inhibitor capable of simultaneously reducing the electrochemical corrosion of Q235 while inhibiting biocorrosion, avoiding the antagonistic effects arising from the simultaneous use of biocides and corrosion inhibitors in the system.