Flower-like Layered NiCu-LDH/MXene Nanocomposites as an Anodic Material for Electrocatalytic Oxidation of Methanol

Direct methanol fuel cell (DMFC) technology has grabbed much attention from researchers worldwide in the realm of green and renewable energy-generating technologies. Practical applications of DMFCs are marked by the development of highly active, efficient, economical, and long-lasting anode catalysts. Layered double hydroxide (LDH) nanohybrids are found to be efficient electrode materials for methanol oxidation. In this study, we synthesized NiCu-LDH/MXene nanocomposites (NCMs) and investigated their electrochemical performance for methanol oxidation. The formation of NCM was verified through field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Brunauer-Emmett-Teller (BET), and X-ray photoemission spectroscopy (XPS) analyses. The cyclic voltammetry, chronoamperometry, and electron impedance spectroscopy techniques were carried out to assess the electrocatalytic ability of the methanol oxidation reaction. The incorporation of MXene enhanced the methanol oxidation 2-fold times higher than NiCu-LDH. NCM-45 exhibited high peak current density (86.9 mA cm^-2), enhanced electrochemical active surface area (7.625 cm²), and long-term stability (77.8% retention after 500 cycles). The superior performance of NCM can be attributed to the synergistic effect between Ni and Cu and, further, the electronic coupling between LDH and MXene. Based on the results, NCM nanocomposite is an efficient anodic material for the electrocatalytic oxidation of methanol. This study will open the door for the development of various LDH/MXene nanocomposite electrode materials for the application of direct methanol fuel cells.