Liquid-free, tough and transparent ionic conductive elastomers based on nanocellulose for multi-functional sensors and triboelectric nanogenerators

Stretchable and transparent ionic conductors have attracted great interest due to their promising applications in flexible wearable electronics. The obvious drawbacks of gel-based ionic conductors such as hydrogels (e.g., evaporation or freezing of water) have driven the demand for liquid-free ionic conductors. This paper reports a new strategy for fabricating transparent, liquid-free ionic conductive elastomers based on renewable nanocellulose. A three-dimensional cellulose skeleton was constructed through ionic cross-linking, and the physically and chemically cross-linked dual network structure was prepared by in situ polymerization of the polymerizable deep eutectic solvent (PDES) therein. The homogeneous three-dimensional cross-linked network provides a site for energy dissipation and ionic migration. Results show that the elastomers retain good transparency and achieve significantly improved mechanical strength, toughness and ionic conductivity. Therefore, they can be applied as multi-functional sensors and triboelectric nanogenerators (TENG). For the optimized TENG, output voltage, current and charge reach 115 V, 6 μA, and 40 nC, respectively. A maximum output power density of 0.35 W/m2 is achieved, and the collected mechanical energy can light up LEDs and power an electronic clock. In addition, the elastomers maintain reliable performance even at low/high temperatures, enabling use in harsh environments. In conclusion, this study developed a promising strategy for the construction of sustainable liquid-free ionic conductors utilizing natural polysaccharides.