材料科学
增塑剂
差示扫描量热法
结晶度
动态力学分析
傅里叶变换红外光谱
生物降解
玻璃化转变
复合材料
丙交酯
化学工程
聚乳酸
高分子化学
共聚物
聚合物
有机化学
化学
物理
热力学
工程类
作者
Jaume Gómez-Caturla,Ivan Dominguez‐Candela,M.P. Medina-Casas,Juan Ivorra Martínez,Virginia Moreno,Rafael Balart,Daniel García‐García
标识
DOI:10.1002/mame.202200694
摘要
Diethyl l‐tartrate (DET) is used as a biobased plasticizer for poly(lactide) (PLA) formulations with improved ductile properties without compromising biodegradation. Different weight percentages (wt.%) of DET in the 0–50 wt.% range are added to PLA by melt compounding and subsequently processed by injection molding. The effect of wt.% DET on mechanical, thermal, thermo‐mechanical, morphology, biodegradation, and crystallinity is studied. Addition of 20 wt.% DET leads to a noticeable increase in elongation at break up to values of 567%, which is quite an interesting result considering the extreme brittleness of PLA. These results are verified by field emission scanning electron microscopy (FESEM) images, where filament‐like structures are observed, indicative of an effective plasticization. Differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) show that the glass transition temperature of PLA is drastically decreased down to values of 23 °C for the sample with the highest amount of DET (50 wt.%), thus increasing its ductility and processability. Fourier‐transformed infrared spectroscopy (FTIR) spectra show that there exists chemical interactions between PLA and DET. Finally, the biodegradability analysis proves that the developed blends are fully biodegradable, achieving complete disintegration after 49 days. It is observed that DET enhanced the disintegration rate of PLA.
科研通智能强力驱动
Strongly Powered by AbleSci AI