模块化设计
计算机科学
机器人
控制工程
控制(管理)
工程类
人工智能
程序设计语言
作者
Jiawei Yi,Wissem Haouas,Kanty Rabenorosoa
标识
DOI:10.1109/marss65887.2025.11072776
摘要
Soft robots inspired by nature have demonstrated several advantages over conventional rigid robots. The design and fabrication of these soft robots are essential to achieve the desired requirements. This paper presents a new modular design of a soft pneumatic arm capable of generating multiple degrees of freedom (DoF) through a specific arrangement of coupled torsional/extensional actuators. Each actuator is lightweight, low-cost, and simple to fabricate. These actuators can be arranged as soft joints, to obtain the desired robot kinematics for the envisioned applications. To validate the proposed approach, the actuator is fabricated and characterized showing 76° of rotational motion and less than 6 mm elongation. In addition, we studied a case of a pick-and-place manipulator capable of generating 4 DoF. An experimental prototype was developed and fabricated using 3D additive manufacturing techniques. The prototype was then characterized and controlled via teleoperation to successfully perform a pick-and-place operation.
科研通智能强力驱动
Strongly Powered by AbleSci AI