Influence of Cast Iron Modification on Free Vibration Frequency of Casting

The paper presents the results of investigations concerning the influence of gray cast iron modification on free vibration frequency of the disc casting.Three different chemical composition melts of gray cast iron were prepared in induction furnace.During gravity casting 0.05% and 0.3% mass of the Inolate modifier was added on stream of metal for changing graphite flakes in castings.Sound signal vibration of cast iron sample was registered by means on microphone for free vibration frequency measurements.Decreasing of free vibration frequency of modified cast iron in comparison with non modified castings was observed.Higher contents of modifier causes more decreasing of free vibration frequency.Cast iron with smaller contents of carbon and silicon have higher free vibration frequency in comparison with eutectic composition cast iron.Hardness of examined cast iron is lower when the more modifier is added during modification process.Free frequency is smaller with smaller Brinell hardness of disc casting.It was concluded that control of free vibration frequency of disc castings by means of chemical composition and modification process can improved comfort and safety of working parts.