腐蚀
材料科学
原电池
电偶腐蚀
开尔文探针力显微镜
极化(电化学)
冶金
镁
阴极保护
紧固件
镁合金
合金
复合材料
电化学
化学
电极
纳米技术
原子力显微镜
物理化学
作者
Jimmy Xueshan Jia,Andrej Atrens,Guang‐Ling Song,Tim H. Muster
标识
DOI:10.1002/maco.200403855
摘要
The galvanic corrosion of magnesium alloy AZ91D coupled to a steel fastener was studied using a boundary element method (BEM) model and experimental measurements. The BEM model used the measured polarization curves as boundary conditions. The experimental program involved measuring the total corrosion rate as a function of distance from the interface of the magnesium in the form of a sheet containing a mild steel circular insert (5 to 30 mm in diameter). The measured total corrosion rate was interpreted as due to galvanic corrosion plus self corrosion. For a typical case, the self corrosion was estimated typically to be ∼ 230 mm/y for an area surrounding the interface and to a distance of about 1 cm from the interface. Scanning Kelvin Probe Force Microscopy (SKPFM) revealed microgalvanic cells with potential differences of approximately 100 mV across the AZ91D surface. These microgalvanic cells may influence the relative contributions of galvanic and self corrosion to the total corrosion of AZ91D.
科研通智能强力驱动
Strongly Powered by AbleSci AI