盘式制动器
拉丁超立方体抽样
消散
热的
机械
压力(语言学)
材料科学
转速
有限元法
动能
制动器
变形(气象学)
灵敏度(控制系统)
方位(导航)
结构工程
机械工程
工程类
计算机科学
复合材料
物理
热力学
经典力学
数学
语言学
统计
哲学
电子工程
人工智能
蒙特卡罗方法
作者
Jihun Song,Seong‐Woong Kang,Youn-Jea Kim
标识
DOI:10.1177/09544062211059112
摘要
Braking devices are devices that convert kinetic energy into thermal energy using frictional force. A disc-type brake uses the frictional force to brake and can be used in a wide range of applications, such as automobiles, railway vehicles, and aircraft. However, heat dissipation of the disc has been considered a major problem. High temperatures during the braking process cause thermal stress and deformation problems of the disc because the physical properties of metal composing the disc change drastically with temperature. In this study, vents were applied on the disc surface to increase their heat dissipation performance. In general, vents are structurally susceptible to stress and deformation. However, heat dissipation is essential because the disc surface rises to high temperatures. Therefore, a thermal-structural coupled analysis was performed using the computational fluid dynamics and finite element method methods. Five different rotational speeds and surface temperatures of the disc were considered. Design of experiments was used to determine an optimized design utilizing the data from the coupled analysis, and Latin hypercube sampling was used to generate samples from a set of N regions. And the genetic algorithm was used to conduct a sensitivity analysis of the design parameters. The optimized design was determined for harsh conditions. The diameters of vents were selected 6.87 mm, 6.12 mm, and 5.99 mm in a radial direction through the optimization. Thermal stress and deformation acting on the disc were reduced in the optimally designed disc. The optimized disc model experiences a 7.01% decrease in maximum equivalent stress when compared to the original disc. The model also decreased by 7.63% in maximum equivalent elastic strain. So, through enhanced convection-induced heat dissipation, the vents can be considered as a new way to prevent problems with the thermal stress and deformation that were apparent at high temperatures.
科研通智能强力驱动
Strongly Powered by AbleSci AI