次氯酸钠
检出限
自来水
循环伏安法
电极
工作电极
材料科学
分析物
电化学
次氯酸盐
化学
无机化学
色谱法
环境工程
环境科学
物理化学
有机化学
作者
Jaligam Murali Mohan,Khairunnisa Amreen,Arshad Javed,Satish Kumar Dubey,Sanket Goel
出处
期刊:Chemosphere
[Elsevier BV]
日期:2022-05-11
卷期号:302: 134915-134915
被引量:6
标识
DOI:10.1016/j.chemosphere.2022.134915
摘要
3D printing technology based electrochemical device can provide ease of fabrication, cost effectiveness, rapid detection and lower limit of detection. Herein, a novel, customized, portable and inexpensive 3D printed electrochemical device, has been presented. Fibrous carbon Toray paper, deposited with gold nanoparticles through electrodeposition, used as a working electrode which Further device was tested with 1 mM sodium hypochlorite using cyclic voltammetry (CV) and square wave voltammetry (SWV) in 0.1 M PBS. Hypochlorite has a pivotal role in supporting the growing chemical and paper industries and finds diverse uses in several clinical applications. It is primarily used for disinfecting food, water and surfaces. The scan rate study was carried out from 20 mVs-1 to 250 mVs-1 using cyclic voltammetry technique. The diffusion coefficient obtained from scan rate effect was 1.39 × 10-6 cm2s-1. The concentration range was evaluated with SWV technique, in a linear range of 0.6 μM-40 μM, with a detection limit of 0.7 μM. The device was further analyzed to ensure non-interference from co-existing chemicals like sodium chloride, potassium nitrate, sodium carbonate, sodium nitrite. Real sample analysis was done with sea, artificial sea and tap water with impressive recovery values. In summary, the developed working electrode can be customized and modified based on testing analyte; thus, the proposed device can be used for various other biochemical analytes.
科研通智能强力驱动
Strongly Powered by AbleSci AI