材料科学
响应度
热电效应
光电子学
制作
兴奋剂
吸收(声学)
带隙
纳米技术
探测器
工程物理
工作(物理)
航程(航空)
半导体
热电材料
噪音(视频)
电流(流体)
掺杂剂
作者
Li J,Jinghan Zhao,Manliu Du,Zhang Chen,Ying Fu,G Zhang,Yaqian Du,J S Liu,Jun Wang
摘要
ABSTRACT Photothermoelectric (PTE) detectors have attracted extensive attention due to the advantages of no external bias, negligible 1/f noise, and low fabrication cost for arrayed and miniaturized devices, and they circumvent the bandgap limitation of traditional photon detectors. However, the practical application of current mainstream PTE materials remains severely hindered by their poor high‐temperature stability, especially in harsh scenarios including high‐temperature monitoring and industrial waste‐heat detection. In this work, CaTiO 3 is selected as the PTE material owing to its outstanding high‐temperature stability, excellent chemical stability, non‐toxicity, and low cost. Nevertheless, intrinsic insulating CaTiO 3 possesses neither efficient optical absorption nor favorable thermoelectric properties. Herein, abundant oxygen vacancies are introduced to endow CaTiO 3 with broad‐spectrum optical absorption via the formation of defect energy levels within the bandgap. Meanwhile, La doping was employed to improve its thermoelectric performance. As a result, the La 0.2 Ca 0.8 TiO 3 sample achieves a responsivity of ≈300 mA W −1 and a noise level below 5 × 10 −9 W Hz −1/2 across a broad spectral range when only intrinsic resistance is considered. It well meets the application needs of harsh civilian environments with no strict requirement for response speed. This work offers a feasible strategy for developing high‐performance PTE detectors applicable to high‐temperature and harsh working conditions.
科研通智能强力驱动
Strongly Powered by AbleSci AI