材料科学
蜂巢
折叠(DSP实现)
变形(气象学)
有限元法
结构工程
压缩(物理)
耐撞性
吸收(声学)
辅助
复合材料
粒子群优化
壳体(结构)
扭转
能量(信号处理)
蜂窝结构
堆积
管(容器)
机械
应变能
替代模型
变形
熔融沉积模型
张力(地质)
优化设计
缩放比例
节点(物理)
机械工程
组分(热力学)
二次方程
情态动词
粒子(生态学)
图像拼接
作者
Yanming Xin,Dexia Chi,Yangyang Zhou,Wang Zn,A M Zhang,Tian Qiu
标识
DOI:10.1088/2631-8695/ae8e3c
摘要
Abstract Lightweight structures with high energy absorption (EA) capacity are important for modern engineering applications. Inspired by turtle shell and conch geometries, this study proposes a novel C-shaped re-entrant auxetic metamaterial twisted re-entrant auxetic honeycomb tube (CRM-TAHTS), which combines a C-shaped re-entrant auxetic cell with a helical configuration. PLA specimens with twist angles of 0°, 15°, 30°, and 45° were fabricated by fused deposition modeling, and their EA performance was evaluated through quasi-static compression tests and validated finite element simulations. The results show that the twisted configuration changes the deformation mode from horizontal layer-by-layer folding to inclined progressive folding with overall rotation, thereby delaying densification. At a twist angle of 15°, the specific energy absorption (SEA) reaches 15.23 J g −1 , which is 9.0% higher than that of the non-twisted counterpart. A full-factorial design with three factors—twist angle, length, and wall thickness—and 4 × 4 × 3 levels was then used to construct a quadratic response surface surrogate model. The model was coupled with a multi-objective particle swarm optimization algorithm to maximize SEA and minimize peak crushing force (PCF). The continuous optimum was identified as θ T = 16.211°, L = 30 mm, and b = 1.1789 mm, and was rounded to a manufacturable design of θ T = 15°, L = 30 mm, and b = 1.2 mm for validation. The validated manufacturable design differs from the continuous surrogate optimum by only 3.30% and 0.01% for SEA and PCF, respectively. These results indicate that CRM-TAHTS provides a promising lightweight energy-absorbing structure for bio-inspired thin-walled component design.
科研通智能强力驱动
Strongly Powered by AbleSci AI