莫来石
材料科学
分散剂
陶瓷
抗压强度
多孔性
复合材料
微观结构
肺表面活性物质
化学工程
粒子(生态学)
色散(光学)
海洋学
光学
物理
地质学
工程类
作者
Jiantao Ren,Wei Ying,Jin Zhao,Jianjun Xie,Guohong Zhou,Ying Shi,Shiwei Wang
标识
DOI:10.1016/j.ceramint.2018.12.125
摘要
Abstract Closed-cell ceramics have attracted broad attention in many areas such as thermal insulation and radomes due to their high strength, low density, and moisture isolation. In this paper, closed-cell mullite ceramics were prepared from particle-stabilized foams via oppositely charged dispersants and surfactants. Mullite particles were dispersed via an anionic dispersant and then hydrophobically modified via a cationic surfactant. The surfactant with long hydrocarbon chains made the particles very hydrophobic, which contributed to the gelation of the particle-stabilized foam. Finally, high-strength porous mullite ceramics with closed cells were obtained. Typically, a compressive strength up to 27.3 MPa was obtained for ceramics with 75% porosity. This is higher than those fabricated by other processes due to the fine and homogeneous cells of the ceramics. We close with a discussion on the effects of the dispersant and surfactant concentration on the porosity, microstructure, and compressive strength of the porous mullite ceramics.
科研通智能强力驱动
Strongly Powered by AbleSci AI