[Comparison between pyrophosphate method and infrared spectrophotometry for determination of silicon dioxide content in dust].

分光光度法 红外分光光度法 焦磷酸盐 化学 二氧化硅 色谱法 核化学 分析化学(期刊) 材料科学 生物化学 冶金
作者
Shu-lan Zhao,M M Liu,H Li,Qiulian Zeng
出处
期刊:PubMed [National Institutes of Health]
卷期号:37 (10): 781-784 被引量:1
标识
DOI:10.3760/cma.j.issn.1001-9391.2019.10.014
摘要

Objective: To discuss the difference between pyrophosphoric acid method and infrared spectrophotometry for the determination of silica content in dust. Methods: The content of silica in the laboratory comparison samples organized by CDC Occupational Health Institute in China in 2018, and purchased quality control samples were determined by pyrophosphate method. Meanwhile, the samples were qualitatively and quantitatively analyzed by infrared spectrophotometry, and the results obtained by the two methods were compared. Results: Four samples (062C1、062C2、GDOHZKTG012-1、GDOHZKTG012-2) were detected by pyrophosphate method and infrared spectrophotometry. The results of pyrophosphate method were 55.49%, 5.24%, 4.90% and 54.72%, respectively. The results of infrared spectrophotometry were 0.91%, 1.87%, 1.29% and 1.16% respectively. Conclusion: The content of silica in dust determined by pyrophosphate method is higher than that by infrared spectrophotometry.目的: 探讨焦磷酸法与红外分光光度法测定粉尘中二氧化硅含量的差异性,为方法的修订提供依据。 方法: 采用焦磷酸法和红外分光光度法分别对2018年中国疾病预防控制中心职业卫生与中毒控制所发放的盲样(062C1、062C2)以及粉尘中游离二氧化硅质量控制样品(GDOHZKTG012-1、GDOHZKTG012-2)进行测定,并对2种方法测得的二氧化硅含量进行比较。 结果: 焦磷酸法检测4个样品(062C1、062C2、GDOHZKTG012-1、GDOHZKTG012-2)中二氧化硅的含量分别为55.49%、5.24%、4.90%、54.72%,红外分光光度法的检测结果分别为0.91%、1.87%、1.29%、1.16%。 结论: 焦磷酸法测得的粉尘中二氧化硅的含量高于红外分光光度法,建议对粉尘中二氧化硅含量测定方法进行修订。.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
1秒前
何渡星舟发布了新的文献求助10
1秒前
1秒前
1秒前
ziqiZhang发布了新的文献求助10
2秒前
527发布了新的文献求助10
2秒前
2秒前
2秒前
2秒前
3秒前
寒冷的咖啡豆完成签到,获得积分10
3秒前
狮山轨迹完成签到,获得积分10
3秒前
3秒前
共享精神应助易笙采纳,获得10
3秒前
蓝天发布了新的文献求助30
3秒前
难过冰萍发布了新的文献求助10
3秒前
UHPC发布了新的文献求助10
3秒前
梦白完成签到 ,获得积分10
3秒前
4秒前
4秒前
科研通AI6.4应助淋女士采纳,获得10
4秒前
5秒前
5秒前
5秒前
5秒前
黄昊龙发布了新的文献求助10
5秒前
午夜煎饼完成签到,获得积分10
5秒前
鲍惜寒发布了新的文献求助10
5秒前
流星不如火球完成签到,获得积分10
5秒前
乐乐应助tulip77采纳,获得10
6秒前
6秒前
7秒前
7秒前
ziqiZhang完成签到,获得积分10
7秒前
研友_ZGjRjn完成签到,获得积分10
8秒前
hjaxii发布了新的文献求助10
8秒前
Ma发布了新的文献求助10
8秒前
Ayw完成签到,获得积分10
8秒前
8秒前
RY发布了新的文献求助20
10秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
Organic Reactions, Volume 116 1500
VALIDATION OF THE TAYLOR, ALAMEL AND VPSC MODELS FOR PLASTIC ANISOTROPY MODELING OF SHEET METALS 1000
Geist der Kunst und Kultur 1000
Resistance Spot Welding Dataset for Automobile Body-in-White Quality Analysis 748
悉尼大学博士学位论文,题目:Modelling and testing of one-sided stitched laminated composites. 作者:Kristopher P. Plain 700
Machine Learning for Asset Management and Pricing 600
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 工程类 有机化学 化学工程 生物化学 计算机科学 内科学 物理 复合材料 催化作用 细胞生物学 无机化学 光电子学 物理化学 电极 基因
热门帖子
关注 科研通微信公众号,转发送积分 7405022
求助须知:如何正确求助?哪些是违规求助? 9009752
关于积分的说明 19186920
捐赠科研通 7038524
什么是DOI,文献DOI怎么找? 3231997
关于科研通互助平台的介绍 2394167
邀请新用户注册赠送积分活动 2214023