碳化作用
熔渣(焊接)
石灰
碳酸钙
冶金
球霰石
材料科学
方解石
化学工程
粒径
杂质
萃取(化学)
碳酸铵
化学
碳酸盐
矿物学
无机化学
色谱法
复合材料
文石
有机化学
工程类
作者
Hannu‐Petteri Mattila,Ron Zevenhoven
出处
期刊:Chemsuschem
[Wiley]
日期:2014-02-27
卷期号:7 (3): 903-913
被引量:33
标识
DOI:10.1002/cssc.201300516
摘要
A mineral carbonation process "slag2PCC" for carbon capture, utilization, and storage is discussed. Ca is extracted from steel slag by an ammonium salt solvent and carbonated with gaseous CO2 after the separation of the residual slag. The solvent is reused after regeneration. The effects of slag properties such as the content of free lime, fractions of Ca, Si, Fe, and V, particle size, and slag storage on the Ca extraction efficiency are studied. Small particles with a high free-lime content and minor fractions of Si and V are the most suitable. To limit the amount of impurities in the process, the slag-to-liquid ratio should remain below a certain value, which depends on the slag composition. Also, the design of a continuous test setup (total volume ∼75 L) is described, which enables quick process variations needed to adapt the system to the varying slag quality. Different precipitated calcium carbonate crystals (calcite and vaterite) are generated in different parts of the setup.
科研通智能强力驱动
Strongly Powered by AbleSci AI