Pultrusion molding of continuous fiber reinforced thermoplastic composite pipe using partially-impregnated commingled yarns

材料科学 心轴 拉挤 复合材料 压缩成型 造型(装饰) 收缩率 复合数 转移模塑 热塑性塑料 模具
作者
Toshihiro Motochika,Masaki OHISHI,Nobuhiko Matsumoto,Akio Ohtani,Asami Nakai
出处
期刊:Advanced Composite Materials [Taylor & Francis]
卷期号:33 (1): 71-89 被引量:2
标识
DOI:10.1080/09243046.2023.2207843
摘要

Pultrusion molding is one of the high-cycle molding methods for continuous fiber-reinforced plastics using thermoplastic resin, and considering the expansion of industrial applications, shaped parts, such as pipes and L-shapes are more desirable. The following is an example of a product that can be used to achieve this goal. Braided fabrics are one of the most useful preforms for achieving pipe shapes. In this study, commingled yarns and partially impregnated commingled yarns were used as intermediate materials, because excellent impregnation properties and textile workability are required to the fabrication and pultrusion molding of the braided fabrics. However, when forming a pipe shape by pultrusion, the mandrel must be placed in the hollow of the molded product, which causes an increase in pull-out resistance due to shrinkage of the pipe diameter. To solve this problem and achieve high-speed molding of pipe-shaped products by pultrusion molding, this study examined the effects of different intermediate materials and molding conditions on the impregnation state and mechanical properties of molded products, as well as the optimization of the mandrel location. The first part of this study revealed that the impregnation time of partially impregnated commingled yarns is shorter than that of commingled yarns, and as a result, the decrease in void ratio and unimpregnated ratio is smaller, and the decrease in mechanical properties is smaller even if the molding speed is increased. The second part of this study, it was found that the mandrel tip should be positioned so that the temperature of the inner diameter side becomes lower than glass-transition temperature (Tg) during cooling to prevent separating. In addition, it was found that temperature history analysis based on heat conduction calculations is effective in predicting the optimum mandrel position, which varies depending on molding conditions. These results provide a guideline for high-speed pultrusion molding.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
灵巧荆完成签到,获得积分10
刚刚
天真凌文发布了新的文献求助10
刚刚
hhh的应助被sjdhasj采纳,获得10
刚刚
刚刚
陈木子发布了新的文献求助10
1秒前
霸气蘑菇发布了新的文献求助10
1秒前
天天向上的应助被Eli采纳,获得10
1秒前
1秒前
千山孤风完成签到,获得积分0
1秒前
研友_GZbV4Z完成签到,获得积分10
2秒前
2秒前
2秒前
托马斯小火车完成签到,获得积分20
2秒前
3秒前
wjl发布了新的文献求助10
3秒前
3秒前
3秒前
超超超仙呐完成签到,获得积分10
3秒前
3秒前
judy891zhu发布了新的文献求助10
3秒前
sypbrooks完成签到,获得积分0
4秒前
无可无不可完成签到,获得积分10
4秒前
灵巧荆发布了新的文献求助10
4秒前
4秒前
zeng发布了新的文献求助10
4秒前
Ren完成签到,获得积分10
4秒前
cr7发布了新的文献求助10
4秒前
4秒前
4秒前
sjdhasj发布了新的文献求助10
5秒前
六金发布了新的文献求助10
5秒前
lykkk发布了新的文献求助10
5秒前
6秒前
拔丝香芋完成签到,获得积分10
6秒前
燕子完成签到,获得积分10
6秒前
6秒前
三三三发布了新的文献求助10
6秒前
Fair完成签到,获得积分10
6秒前
Jun举报simon的求助涉嫌违规
7秒前
7秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
plantTFDB 508
Resource Recovery Handbook 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8174709
求助须知:如何正确求助?哪些是违规求助? 9566632
关于积分的说明 21787910
捐赠科研通 7768948
什么是DOI,文献DOI怎么找? 3431758
关于科研通互助平台的介绍 2555972
邀请新用户注册赠送积分活动 2477147