钨铬钴合金
材料科学
激光功率缩放
响应面法
激光器
穿透深度
稀释
实验设计
Box-Behnken设计
高温合金
激光扫描
复合材料
数学
统计
光学
热力学
微观结构
物理
作者
Sayed Hamid Hashemi,Reza Vafaei,Reza Shoja Razavi
标识
DOI:10.1016/j.jmrt.2023.12.201
摘要
Applications of 316 stainless steel can be developed by laser cladding of the Co-based superalloys, which has multiple enhancement properties and creates a small heat affected zone. Quantitive investigation of the effect of process parameters on geometrical features and providing reliable models to achieve the desirable metallurgical bond, minimal structural defects, and predicting the dimensions of the geometry without conducting excessive experimental tests are an important issue. This study evaluate the effects of the main process parameters of laser cladding on geometric characteristics of stellite 6 using the response surface methodology. A quadratic model was developed for each of the geometric characteristics. Laser power, scanning speed, and powder feed rate ranged between 400 and 600 W, 6–10 mm/s and 12–20 gr/min, respectively, were considered as the input variables and height, width, penetration depth and dilution were considered as responses. The experiments were designed using the box-behnken method. The accuracy and fitness of the models were evaluated using analysis of variance method. The results indicated the R2 factors obtained for height, width, penetration depth and dilution are equal to 0.89, 0.98, 0.98 and 0.96 respectively. After obtaining the desirability factor of 0.795, the optimal set of process parameters were selected as laser power of 510 W, scanning speed of 10 mm/s and powder feed rate of 13 gr/min. Verification of the optimization was done by performing experimental test,which maximum 13 % difference between actual values and the predicted values was obtained.
科研通智能强力驱动
Strongly Powered by AbleSci AI