烧结
原位
材料科学
电极
氧化物
克拉克电极
化学工程
氧气
析氧
无机化学
冶金
化学
电化学
物理化学
有机化学
工程类
电解质
作者
Haozhen Li,Hao Shi,Shuai Yuan,Yuxuan Fei,Hengyong Tu,Chao Ma,Lei Zhu,Zhen Yu Huang
出处
期刊:Chemsuschem
[Wiley]
日期:2025-06-09
卷期号:18 (15): e202500213-e202500213
被引量:1
标识
DOI:10.1002/cssc.202500213
摘要
Solid oxide cells (SOCs) are efficient energy conversion devices that facilitate flexible utilization between electricity and chemical energy. However, current collection efficiency between cells and interconnects remains a key challenge for the large‐scale application of SOCs. This study reports on a (Cu,Mn) 3 O 4 /CuO mesh, designed as the oxygen electrode contact layer (CL) for SOCs, prepared through a straightforward manganese electrodeposition on copper mesh and in situ reactive sintering method. The conformal and continuous spinel layer significantly reduces the electron conduction resistance of the composite mesh, showing an area‐specific resistance (ASR) value of 19 mΩ cm 2 at 850 °C, approximately half that of the pristine copper mesh. In midterm testing, including 300 h of isothermal aging at 850 °C and 20 thermal cycling events between 200 °C and 850 °C, the ASR of a sandwich structure including oxygen electrode/CL/interconnect remains below 30 mΩ cm 2 . Besides, a larger composite mesh with 16 cm 2 active area is evaluated in a single‐cell test at 850 °C, and the total Ohmic resistances for the fuel cell and electrolysis cell are 480 mΩ cm 2 and 561 mΩ cm 2 , respectively. The present work offers new insights into the design of 3D and self‐supporting CLs for SOCs.
科研通智能强力驱动
Strongly Powered by AbleSci AI