胶凝的
城市固体废物
材料科学
废物管理
机制(生物学)
工业废物
环境科学
水泥
冶金
工程类
哲学
认识论
作者
Xinzhuang Cui,Huaming Meng,Zhanghong Liu,Hao Ran Sun,Xiaoning Zhang,Qing Jin,Lei Wang
出处
期刊:Buildings
[Multidisciplinary Digital Publishing Institute]
日期:2025-03-10
卷期号:15 (6): 864-864
被引量:10
标识
DOI:10.3390/buildings15060864
摘要
Insufficient utilization of industrial solid waste and the high carbon emissions caused by the use of cement in engineering construction are two challenges faced by China. This study aimed to develop a multi-source industrial solid waste cementitious material (MSWC) for fluidized solidified soil (FSS) in soil backfill projects. First, the response surface models for the unconfined compressive strength (UCS) of MSWC-FSS were established, and the optimal mixing ratio of MSWC was determined. Subsequently, laboratory tests were conducted to compare the differences in flow expansion, UCS, and dry shrinkage between MSWC and ordinary Portland cement (OPC) in FSS, and the feasibility of MSWC-FSS was verified through on-site tests. Finally, the curing mechanism of MSWC-FSS was analyzed by XRD and SEM. The results showed that MSWC had an optimal mix ratio: steel slag (SS): ground granulated blast-furnace slag (GGBS): circulating fluidized bed fly ash (CFBFA): flue gas desulfurization gypsum (FGDG): OPC = 20:40:15:5:20. MSWC-FSS had good flow expansion, and its UCS and drying shrinkage resistance were more than 10% better than OPC-FSS. The on-site test also proved the practicability and progressiveness of MSWC-FSS. According to the chemical composition and microstructure, MSWC-FSS generated more ettringite than OPC-FSS, making MSWC-FSS denser.
科研通智能强力驱动
Strongly Powered by AbleSci AI