碳化物
材料科学
催化作用
氮化物
无机化学
甲醇
甲烷
氢
化学工程
化学
有机化学
冶金
纳米技术
工程类
图层(电子)
作者
Marwa Abou Hamdan,Abdallah Nassereddine,Ruben Checa,Mohamad Jahjah,Catherine Pinel,L. Piccolo,Noémie Perret
标识
DOI:10.3389/fchem.2020.00452
摘要
Catalysts based on molybdenum carbide or nitride nanoparticles (2-5 nm) supported on titania were prepared by wet-impregnation followed by a thermal treatment under alkane (methane or ethane)/hydrogen or nitrogen/hydrogen mixture, respectively. The samples were characterized by elemental analysis, volumetric adsorption of nitrogen, X-ray diffraction, and transmission electron microscopy. They were evaluated for the hydrogenation of CO2 in the 2-3 MPa and 200-300 °C ranges with a gas-phase flow fixed bed reactor. CO, methane, methanol, and ethane (in fraction-decreasing order) were formed on carbides, whereas CO, methanol, and methane were formed on nitrides. The carbide and nitride phase stoichiometries were tuned by varying the preparation conditions, leading to C/Mo and N/Mo atomic ratios of 0.2-1.8 and 0.5-0.7, respectively. The carbide activity increased for lower carburizing alkane concentration and temperature, i.e. lower C/Mo ratio. Enhanced carbide performances were obtained with pure anatase titania as compared to P25 (anatase/rutile) titania or zirconia as support, with a methanol selectivity up to 11% at 250 °C. The nitride catalysts appeared less active but reached a methanol selectivity of 16% at 250 °C.
科研通智能强力驱动
Strongly Powered by AbleSci AI