微观结构
材料科学
等轴晶
钛合金
层状结构
针状的
合金
冶金
退火(玻璃)
可塑性
极限抗拉强度
锻造
马氏体
复合材料
作者
Yuqi Zhang,Sheng Zhang,Zhiyi Zou,Yusheng Shi
标识
DOI:10.1016/j.msea.2022.142944
摘要
A better combination of strength and plasticity may be imparted by the tri-modal microstructure in titanium alloys than the as-built acicular martensite. It is generally conceived that hot working is required for the globularization of the α phase in traditional manufacturing. In this article, we report an innovative strategy to obtain a tri-modal microstructure consisting of globularized α in laser powder bed fusion (L-PBF) Ti–6.5Al–2Zr–1Mo–1V (TA15) alloy, which only consists of post-process heat treatment. A tri-modal microstructure formed by the equiaxed α, lamellar α, and transformed β matrix may be effectively introduced by the multiple annealing heat treatment. A significant improvement in ductility by 72.32% was obtained with final microstructure leads, maintaining a desired high strength and providing tensile properties comparable to those of its forging counterparts. • The triple heat treatment parameters in the field of L-PBF Ti alloy are studied. • An ideal tri-modal microstructure consisting of ~17% equiaxed α, ~48% lamellar α and ~35% transformed β matrix is obtained. • The optimal tri-modal microstructure is an effective and practical microstructure for the balance of plasticity and strength of titanium alloys. • The globularization of the primary α satisfies the boundary-splitting globularization mechanism.
科研通智能强力驱动
Strongly Powered by AbleSci AI