Experimental Investigation of Process Parameters on Defects Generation in Copper to AA6061-T651 friction stir Welding
搅拌摩擦焊
材料科学
铜
冶金
焊接
出处
期刊:International journal of advances in mechanical and automobile engineering [International Institute of Engineers] 日期:2016-03-20卷期号:3 (1)被引量:5
标识
DOI:10.15242/ijamae.e0316007
摘要
Dissimilar materials copper and aluminum joining is difficult to achieve by friction stir welding due to the enormous difference of their thermo-physical performances.Present investigation provides a study on friction stir welding defects under different process parameters of dissimilar copper-aluminum system.Effect of tool design, tool pin offset, welding speed and tilt angle on defects formation studied experimentally.Visual observations and macrostructure examinations were performed to study the different defects for dissimilar copper-aluminum friction stir welding system.Voids, pores, cracks, surface lines and flash effects were observed due to inappropriate parameters of friction stir welding.Tool pin profile, shoulder diameter, tool pin offset, welding speed and tilt angle affect the quality of dissimilar copper-aluminum friction stir welding.