多硫化物
阴极
材料科学
阳极
氧化还原
电化学
纳米晶
石墨烯
化学工程
纳米技术
动力学
离子键合
电极
硫黄
结构稳定性
催化作用
电化学动力学
合理设计
氧化物
储能
原位
表征(材料科学)
纳米结构
作者
Tong Wang,Junxian Wu,Xiaobin He,Mohan Yang,Jinhui Cao,Yuhan Duan,Ruiqi Li,Jingze Guo,Yufeng Luo,Jinghua Guo,Yifei Yuan,Guoqiang Tan
出处
期刊:ACS Nano
[American Chemical Society]
日期:2026-11-14
标识
DOI:10.1021/acsnano.6c17373
摘要
Abstract Li2S is a promising cathode candidate for Li–S batteries; however, its use is hindered by sluggish redox kinetics and severe polysulfide dissolution. Herein, we propose a collaborative multifunctional regulatory strategy via in situ construction of an integrated Li2S-LiF@graphene capsule by one-step lithiothermic symbiosis (8Li + CS2 + CF4 = 2Li2S + 4LiF + 2C). In this cathode architecture, highly dispersed built-in LiF nanocrystals twinned with active Li2S nanocrystals create abundant and fast ionic-conductive interfaces to accelerate Li-ion transport; meanwhile, symbiotic few-layer graphene shells act as electron highways and physicochemical barriers to inhibit polysulfide loss, thus promoting redox kinetics and structural stability. Multiscale structural characterization combined with in situ analysis confirms enhanced structural stability and electrochemical reversibility. Benefiting from the improved electrical and kinetic properties, as well as high volumetric efficiency for accommodating sulfur species, the Li2S-LiF@graphene cathode exhibits a high areal capacity of 6.3 mAh cm–2 under a high Li2S areal loading (8.9 mg cm–2), a thin Li anode thickness (50 μm), and a lean electrolyte-to-Li2S ratio (4.9 μL mg–1). In a completely anode-free Li2S-LiF@graphene//Ni cell, it delivers 882 mAh g–1 and retains 650 mAh g–1 after 100 cycles. This lithiothermic symbiosis approach combined with multicomponent collaborative regulation offers rational Li2S-based cathode engineering for high-performance anode-less/free Li–S batteries.
科研通智能强力驱动
Strongly Powered by AbleSci AI