Abstract The existing plug seedling transplanters that are used for large-scale vegetable cultivation in China are faced with three main issues: the poor reliability of electrical control systems in the harsh conditions in the field, low efficiency of single-row operations, and low success rates for the picking and depositing of seedlings. To address these issues, this paper presents a high-speed transplanter for plug seedlings equipped with a mechanical and pneumatic synergistic drive system. A kinematic analysis is conducted to determine the main parameters, including the numbers of teeth for the seedling supply ratchet and for the driving sprocket, and a mechanical analysis shows that the minimum clamping force for the seedling picking gripper is 2.0 N. Simulations with FluidSIM software verify that the cylinder action sequence meets the design requirements. The optimal values for the parameters are a picking frequency of 112 seedlings/min, a working pressure of 0.4 MPa, and a seedling height of 145 mm. Field tests of the transplanter with these values indicate that the average success rate for picking and depositing of seedlings, the average missed planting rate, and the single-row transplanting frequency of the transplanter are 96.48%, 3.65%, and 124 seedlings/min, respectively. This study provides theoretical guidance for the design and optimisation of high-speed transplanters.