催化作用
化学
吸附
硫酸盐
氧化还原
金属
化学工程
无机化学
催化剂载体
合成气
核化学
硫黄
反应条件
多相催化
协同催化
一氧化碳
烟气
工业催化剂
过渡金属
作者
Zehui Yu,Jianyu Cai,Yudong Meng,Jian Li,Xing Fan,Wenjun Liang
标识
DOI:10.1021/acs.iecr.5c05100
摘要
Developing highly efficient, SO 2 -resistant low-temperature CO oxidation catalysts is crucial for industrial applications. This study optimized Pt–Pd/TiO 2 catalysts via TiO 2 support precalcination. Precalcination at 600–800 °C significantly enhanced the CO oxidation activity and SO 2 tolerance. The sample precalcined at 700 °C (denoted Pt–Pd/TiO 2 (700)) showed the best performance, achieving complete CO conversion ( T 100 ) at 120 °C under a feed gas (0.8% CO, 5% O 2, balance N 2 )─a significant 50 °C reduction compared to the T 100 of 170 °C for the unmodified Pt–Pd/TiO 2 catalyst. In a 45 h stability test under a wet gas containing 15% H 2 O and 200 ppm of SO 2, Pt–Pd/TiO 2 (700) maintained >95% CO conversion, outperforming the unmodified Pt–Pd/TiO 2 catalyst (74.2%). Characterization revealed that precalcination at 700 °C increased surface Pt/Pd concentration and metallic species proportion, improving activity. Enlarged Pt/Pd particles and pores also inhibited SO 2 adsorption and sulfate formation, enhancing the SO 2 resistance. The Pt–Pd/TiO 2 (700) catalyst shows promising potential for industrial CO removal.
科研通智能强力驱动
Strongly Powered by AbleSci AI