烯烃纤维
选择性
催化作用
化学
纤维素
羧甲基纤维素
吸附
费托法
Zeta电位
无机化学
高分子化学
有机化学
化学工程
工程类
纳米颗粒
钠
作者
Yuxi Zhang,Xinyu Guo,Bo Liu,Jianli Zhang,Xinhua Gao,Qingxiang Ma,Subing Fan,Tiansheng Zhao
出处
期刊:Fuel
[Elsevier BV]
日期:2021-03-08
卷期号:294: 120504-120504
被引量:38
标识
DOI:10.1016/j.fuel.2021.120504
摘要
• Fe 3 O 4 catalyst with hydrophilic surface by cellulose modification for FTS. • Chain growth promoted by hydroxyl groups. • Secondary reactions of primary products suppressed. • Good selectivity toward light olefins and linear α-olefins. Cheap and renewable cellulose used for surface modification was adopted in iron catalysts for CO hydrogenation. Fe 3 O 4 were first prepared by solvothermal method and then modified by hydroxyethyl cellulose (HEC) and carboxymethyl cellulose (CMC), respectively, which were employed as model catalysts to investigate the modification effect on olefin formation in Fischer-Tropsch synthesis. The catalysts were characterized by SEM, N 2 adsorption, XRD, TG, FT-IR, H 2 O-TPD-MS, CO-TPD, H 2 -TPR, XPS, Zeta potential and contact angle measurements. Results demonstrated that on Fe 3 O 4 /HEC, light olefins (C 2 = –C 4 = ) and linear C 5 + α-olefins were highly produced with an olefin/paraffin (O/P) ratio of 4.4. Compared with Fe 3 O 4 , the linear α-olefin selectivity was increased from 5% to 61.5%, and the methane selectivity was reduced to 14.7%. The CO conversion was higher on Fe 3 O 4 /CMC (50.8%) than on Fe 3 O 4 /HEC (8.8%) due to the electronic effect of –COONa. High olefin selectivity was mainly caused by the iron surface modification, which inhibited the secondary hydrogenation of primary olefins. The hydroxyl on HEC promoted the chain growth resulting in higher C 5 + hydrocarbons. Surface hydroxyl groups played an improtant role in tuning the product distribution and promoting the formation of linear α-olefins in CO hydrogenation.
科研通智能强力驱动
Strongly Powered by AbleSci AI