The effect of implant design on insertion torque and immediate micromotion

Abstract Objectives: To evaluate the effect of insertion torque on micromotion to a lateral force in three different implant designs. Material and methods: Thirty‐six implants with identical thread design, but different cutting groove design were divided in three groups: (1) non‐fluted (no cutting groove, solid screw‐form); (2) fluted (90° cut at the apex, tap design); and (3) Blossom ™ (Patent pending) (non‐fluted with engineered trimmed thread design). The implants were screwed into polyurethane foam blocks and the insertion torque was recorded after each turn of 90° by a digital torque gauge. Controlled lateral loads of 10 N followed by increments of 5 up to 100 N were sequentially applied by a digital force gauge on a titanium abutment. Statistical comparison was performed with two‐way mixed model ANOVA that evaluated implant design group, linear effects of turns and displacement loads, and their interaction. Results: While insertion torque increased as a function of number of turns for each design, the slope and final values increased ( P <0.001) progressively from the Blossom ™ to the fluted to the non‐fluted design (M±standard deviation [SD]=64.1±26.8, 139.4±17.2, and 205.23±24.3 Ncm, respectively). While a linear relationship between horizontal displacement and lateral force was observed for each design, the slope and maximal displacement increased ( P <0.001) progressively from the Blossom ™ to the fluted to the non‐fluted design (M±SD=530±57.7, 585.9±82.4, and 782.33±269.4 μm, respectively). There was negligible to moderate levels of association between insertion torque and lateral displacement in the Blossom ™ , fluted and non‐fluted design groups, respectively. Conclusion: Insertion torque was reduced in implant macrodesigns that incorporated cutting edges, and lesser insertion torque was generally associated with decreased micromovement. However, insertion torque and micromotion were unrelated within implant designs, particularly for those designs showing the least insertion torque. To cite this article: Freitas AC Jr, Bonfante EA, Giro G, Janal MN, Coelho PG. The effect of implant design on insertion torque and immediate micromotion. Clin. Oral Impl. Res . 23 , 2012; 113–118. doi: 10.1111/j.1600‐0501.2010.02142.x