剪应力
流量(数学)
地质学
材料科学
剪切(地质)
岩土工程
机械
点(几何)
压力(语言学)
流动阻力
点棒
剪切流
推移质
抗剪强度(土壤)
剪切速率
单剪
几何学
临界切应力
变形(气象学)
作者
Zhuoliang Zhou,Minghui Yu,Haoyong Tian,Di Wu,Huawei Xiang
标识
DOI:10.1080/00221686.2026.2621814
摘要
Laboratory flume experiments and three-dimensional Reynolds stress model simulations were combined to quantify how a point bar modifies the flow structure and boundary shear stress in a 120° sharp bend. ADV measurements were conducted for the point-bar case, and companion simulations were performed for widened and uniform-width bends without a point bar. Results show that the point bar fundamentally reorganizes the bend secondary circulation, including a topography-induced splitting of the central-region cell, and shifts the peak bed shear stress toward the outer bank near the bend exit. Four bed shear stress estimation methods (Reynolds-stress, log-law, turbulent kinetic energy, and numerical model) were systematically compared, revealing strong method-dependent bias under sharply curved, bar-influenced conditions. Using the experimental dataset, key parameters for each method were calibrated, and their ranges of applicability were identified, thereby improving the consistency of bed-shear-stress estimates. A drag coefficient-based formulation is also discussed as a compact alternative, emphasizing that spatially variable resistance linked to secondary flow topology is required for defensible predictions.
科研通智能强力驱动
Strongly Powered by AbleSci AI