材料科学
电解质
法拉第效率
堆积
阴极
堆栈(抽象数据类型)
电池(电)
锂(药物)
化学键
纳米技术
复合材料
阳极连接
电容
接口(物质)
光电子学
粘附
电容器
阳极
集电器
图层(电子)
化学能
化学工程
锂电池
沉积(地质)
电极
经济短缺
表面能
热压连接
航空航天
共金键结
电接点
金属锂
原子层沉积
直接结合
储能
工程物理
电压
抗剪强度(土壤)
作者
Rongrong Guo,Songmei Li,Xiaoyun Xu,Wenqiang Zhang,Yi Luo,Jinyan Zhong,Jingyi Qiu,Shubin Yang,Bin Li,Xiangbiao Liao
摘要
ABSTRACT The reliance on high stack pressure in lithium metal batteries (LMBs) conflicts with the requirements of lightweight design and low‐pressure operating environments, motivating the development of pressure‐independent battery designs. Here, a chemical bonding interfacial prototype is proposed to substitute the physical contact interface, thereby liberating LMBs from high stacking pressures. This chemical bonding interface is constructed via strong interactions between the carbonyl groups of poly(ε‐caprolactone) segments and Li metal, manifesting as Li─O bonding interfaces. Benefiting from Li─O bonding, the PPE electrolyte exhibits a high adhesion energy of 22.44 J m −2 and a high lap shear strength of 0.31 MPa, sustaining intimate electrode–electrolyte contact without external stack pressure. In addition, the Li─O bonding interface significantly reduces the thickness of the electric double layer, achieving a 120% increase in capacitance (0.20 µF cm −2 ), thus promoting efficient transport (t Li+ = 0.7) and uniform deposition of Li + . As a result, the Li||Cu half‐cell equipped with PPE electrolyte achieves a superior coulombic efficiency of 99.78%. A pouch cell equipped with PPE electrolyte and NCM cathode demonstrates high capacity retention of 90.12% after 40 cycles at −0.1 MPa (relative to standard atmospheric pressure). This discovery offers novel insights into material and structural design for pressure‐insensitive batteries intended for high‐altitude aerospace applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI