电解质
材料科学
锂(药物)
离子电导率
结晶度
化学工程
聚合物
丁二腈
快离子导体
无定形固体
化学
有机化学
复合材料
电极
医学
物理化学
工程类
内分泌学
作者
Lyu Wang,Guoqiang He,Ting Liu
出处
期刊:ChemistryOpen
[WileyOpen]
日期:2020-06-01
卷期号:9 (6): 713-718
被引量:42
标识
DOI:10.1002/open.202000107
摘要
Abstract All‐solid‐state polymer lithium‐ion batteries are ideal choice for the next generation of rechargeable lithium‐ion batteries due to their high energy, safety and flexibility. Among all polymer electrolytes, PEO‐based polymer electrolytes have attracted extensive attention because they can dissolve various lithium salts. However, the ionic conductivity of pure PEO‐based polymer electrolytes is limited due to high crystallinity and poor segment motion. An inorganic filler SiO 2 nanospheres and a plasticizer Succinonitrile (SN) are introduced into the PEO matrix to improve the crystallization of PEO, promote the formation of amorphous region, and thus improve the movement of PEO chain segment. Herein, a PEO 18 −LiTFSI−5 %SiO 2 −5 %SN composite solid polymer electrolyte (CSPE) was prepared by solution‐casting. The high ionic conductivity of the electrolyte was demonstrated at 60 °C up to 3.3×10 −4 S cm −1 . Meanwhile, the electrochemical performance of LiFePO 4 /CSPE/Li all‐solid‐state battery was tested, with discharge capacity of 157.5 mAh g −1 at 0.5 C, and capacity retention rate of 99 % after 100 cycles at 60 °C. This system provides a feasible strategy for the development of efficient all‐solid‐state lithium‐ion batteries.
科研通智能强力驱动
Strongly Powered by AbleSci AI