硫酸
膜
聚偏氟乙烯
极限抗拉强度
傅里叶变换红外光谱
水溶液
材料科学
多孔性
接触角
Zeta电位
化学工程
化学
复合材料
有机化学
纳米颗粒
工程类
生物化学
冶金
纳米技术
作者
Kayode Hassan Lasisi,Weihao Yao,Temitope Fausat Ajibade,Huali Tian,Fang Fang,Kaisong Zhang
出处
期刊:Membranes
[Multidisciplinary Digital Publishing Institute]
日期:2020-11-27
卷期号:10 (12): 375-375
被引量:18
标识
DOI:10.3390/membranes10120375
摘要
This study investigated the effects of an aqueous acidic solution at typical concentrations on polymeric polyvinylidene fluoride (PVDF)-based membranes. Flat-sheet PVDF-based membranes were completely embedded in sulfuric acid at varying concentrations. The effect of the acid concentration after a prolonged exposure time on the chemical, mechanical and physical properties of the membrane were checked via FE-SEM, EDX (Energy-Dispersive Spectrometer), FTIR, XRD, tensile strength, zeta potential, contact angle, porosity, pure water flux measurement and visual observation. The result reveals prompt initiation of reaction between the PVDF membrane and sulfuric acid, even at a mild concentration. As the exposure time extends with increasing concentration, the change in chemical and mechanical properties become more pronounced, especially in the morphology, although this was not really noticeable in either the crystalline phase or the functional group analyses. The ultimate mechanical strength decreased from 46.18 ± 0.65 to 32.39 ± 0.22 MPa, while the hydrophilicity was enhanced due to enlargement of the pores. The flux at the highest concentration and exposure period increased by 2.3 times that of the neat membrane, while the BSA (Bovine Serum Albumin) rejection dropped by 55%. Similar to in an alkaline environment, the stability and performance of the PVDF-based membrane analyzed in this study manifested general deterioration.
科研通智能强力驱动
Strongly Powered by AbleSci AI