材料科学
热阻
热导率
光电子学
散热片
电介质
发光二极管
热的
电子设备和系统的热管理
热流密度
基质(水族馆)
传热
复合材料
机械工程
热力学
工程类
地质学
物理
海洋学
作者
Yan-Hui Chen,Yang Mei,Huan Xu,Rongbin Xu,Leiying Ying,Zhi-Wei Zheng,Hao Long,Baoping Zhang
标识
DOI:10.1109/lpt.2020.3040550
摘要
Double dielectric DBR based GaN-based micro cavity light emitting devices with two different structures were fabricated, and their thermal characteristics were investigated. To improve thermal dissipation, an AlN current confinement layer with a much higher thermal conductivity than SiO2and an electroplated copper heat sink were utilized. The thermal resistance of the device decreased from 923 K/W to 457 K/W, half of that obtained with the typically used SiO2current confinement layer and bonded substrate. This is the lowest reported value in GaN-based micro cavity light-emitting devices with double dielectric DBRs. Temperature distribution and heat flux inside of the device was simulated based on a steady state quasi three-dimensional cylindrical model. The results show that heat transport in vertical direction is efficiently bypassing the bottom DBR to the copper plate. This work provides an effective method to improve thermal characteristics of GaN-based micro cavity light-emitting devices with double dielectric DBR structure.
科研通智能强力驱动
Strongly Powered by AbleSci AI