挖掘机
过程(计算)
工程类
控制工程
领域(数学)
水力机械
组分(热力学)
流离失所(心理学)
工作(物理)
计算机科学
设计工具
控制系统
软件
代表(政治)
功率(物理)
设计过程
关系(数据库)
工程设计过程
系统设计
繁荣
基于模型的设计
过程建模
系统模型
机械工程
控制阀
建模与仿真
模拟
开发(拓扑)
数学模型
系统工程
作者
Andrea Fornaciari,Alice Betti,Barbara Zardin,Francesco De Martino,Anna Pionetti,Davide Mesturini
标识
DOI:10.1088/1742-6596/3143/1/012063
摘要
This work stems from the need in the fluid power industry to achieve energy and cost savings while testing different design and control alternatives in work vehicles. One way to achieve this goal is to include more modeling and simulation activities in the industrial process of system and component design. However, developing a model that is detailed, reliable, and characterized by reasonable computational times is a complex task. In this context, this paper describes the process followed to obtain a numerical tool capable of replicating the behavior of a reference mini excavator, which can be used for different purposes in the design and testing phase by the company involved in the project. The same modeling process can be also used as guidelines by other industrial engineers and researchers involved in the development of similar tasks. In this work, a lumped parameter model of the hydraulic system is thus developed exploiting the commercial software Simcenter Amesim®. The modeling focuses on the fluid power generation group, which includes a variable displacement swash plate pump, a detailed representation of the main valves, and the arm actuators. The two main valves in the system are a post-compensated directional valve and a displacement regulator. The boom movements (boom, arm, and bucket) are modeled using both 2D and 3D multi-body approach to ensure better correlation with field data. Dedicated field tests, including a complete digging cycle, were in fact conducted in collaboration with the company to obtain data for the experimental-numerical comparison and the consequent validation of the model and the load sensing control logic tested. The validated model allows us to obtain a numerical tool capable of replicating the system behavior with different operating parameters, different valves or exploring alternative control strategies using a dedicated interface that enables seamless integration with MATLAB Simulink®. An example of the model application is also presented, obtained by virtually testing two different control strategies for the pump displacement.
科研通智能强力驱动
Strongly Powered by AbleSci AI