尸体痉挛
枕骨
医学
生物力学
运动范围
口腔正畸科
固定(群体遗传学)
中性区
解剖
外科
人口
髋关节屈曲
环境卫生
作者
Renan Jose Rodrigues Fernandes,Aaron Gee,Nicole Schneider,Andrew James Kanawati,Christopher S. Bailey,Radovan Zdero,Parham Rasoulinejad
标识
DOI:10.1177/21925682251339994
摘要
Study Design In-vitro biomechanical study. Objectives Injuries or degenerative conditions can lead to atlantoaxial instability requiring fixation. We aim to assess and compare the biomechanics of a C1-C2 posterior arch and translaminar screw construct against the Harms procedure for posterior atlantoaxial fixation on a human cadaveric model. Methods Nine human cadaveric cervical specimens from occiput to C3 (C0-C3) were used for range of motion (ROM) testing. Each specimen was tested for 4 configurations: 1. Intact, 2. Destabilized, 3. Harms construct, 4. C1-C2 posterior arch screw (PAS) construct. A pure moment of 1.5 Nm was applied, and ROM of the C1-C2 segment was measured in flexion-extension, lateral bending, and axial rotation. Results The Harms group showed a decrease in ROM in all modes ( P < 0.021), and the PAS group showed a decrease in ROM in flexion-extension and lateral bending ( P < 0.002), but not in lateral bending ( P = 0.176). Compared to the intact condition, Harms showed increased ROM for flexion-extension ( P = 0.012), and PAS did not ( P = 0.258). In lateral bending, both constructs did not significantly reduce ROM ( P > 0.058). In axial rotation, both constructs showed a significant increase in ROM ( P < 0.002). There was no significant difference in ROM when comparing Harms with PAS in flexion-extension ( P = 1.000), lateral bending ( P = 0.163), or axial rotation ( P = 1.000). Conclusions The study demonstrates that a C1-C2 PAS construct restores or increases biomechanical stability compared to the intact condition. C1-C2 PAS offers similar biomechanical stability compared to the Harms construct.
科研通智能强力驱动
Strongly Powered by AbleSci AI