A fluorescence nanoprobe of N-Acetyl-L-Cysteine capped CdTe QDs for sensitive detection of nitrofurazone

A method was established for detecting the content of nitrofurazone (NFZ) by fluorescence quenching of N-Acetyl-L-Cysteine (NAC) coated cadmium telluride quantum dots (CdTe QDs). By means of transmission electron microscopy (TEM) and multispectral methods such as fluorescence and ultraviolet visible spectra (UV-vis), the synthesized CdTe QDs were characterized. The quantum yield (φ) of CdTe QDs was measured as 0.33 by reference method. The CdTe QDs had a better stability, the RSD of fluorescence intensity was 1.51% in three months. NFZ quenching the emission light of CdTe QDs was observed. The analyses of Stern-Volmer and time-resolved fluorescence suggested the quenching was static. The binding constants (Ka) between NFZ and CdTe QDs were 1.14 × 104 (293 K), 0.74 × 104 (303 K) and 0.51 × 104 (313 K) L mol-1. The hydrogen bond or van der Waals force was the dominated binding force between NFZ and CdTe QDs. The interaction was further characterized by UV-vis absorption as well as Fourier transform infrared spectra (FT-IR). Using fluorescence quenching effect, a quantitative determination of NFZ was carried out. The optimal experimental conditions were studied and determined as following: pH was 7 and contact time was 10 min. The effects of reagent addition sequence, temperature and the foreign substances including some metals (Mg2+; Zn2+; Ca2+; K+; Cu2+), glucose, bovine serum albumin (BSA) and furazolidone on the determination were studied. There was a high correlation between the concentration of NFZ (0.40 - 39.63 μg mL-1) and F0/F with the standard curve F0/F = 0.0262c + 0.9910 (r = 0.9994). The detection limit (LOD) reached 0.04 μg mL-1 (3S0/S). The contents of NFZ in beef and bacteriostatic liquid were detected. The recovery of NFZ was 95.13% - 103.03% and RSD was 0.66% - 1.37% (n = 5).