Comparative Analysis of Liquid Steel Fluid Dynamics, Including Spillage and Spreading on the Bottom of a Three-Strand Tundish Between Two Turbulence Inhibitors at the Start of the Casting Sequence

Casting AISI 52100 steel represents a challenge, particularly at the start of the casting sequence, due to its low melting point. The steel spilling over the tundish bottom cools down rapidly and freezes in the stopper rods, obliging the closure of a strand. Therefore, an additional function of turbulence inhibitors is to induce steel masses at a slow cooling rate. This paper deals with the physical and mathematical modeling of unsteady state-flows using two turbulence inhibitors (TIs) during the sequence start. One of the TIs makes steel spill forming thin layers of liquid on the tundish bottom, while the other forms a thicker layer. Based on the Flow of Volume Model, the mathematical simulation was satisfactorily replicated in the water model.