The effect of Pluronic P123 on shape memory of cross-linked polyurethane/poly(l-lactide) biocomposite

Polyurethane (PU) and poly(l-lactide) (PLLA) have attracted increasing attention in the development of shape memory polymers (SMPs) due to their good biocompatibility and degradability. Although Pluronic P123 can be used to tune polymeric surface hydrophilicity, its effect on SM performance is a mystery. In this study, a soluble cross-linked PU is synthesized as the switching phase and combined with PLLA and P123 to construct a hydrothermally responsive SM composite. The water contact angle of PU/PLLA/P123 decreases from 22.7° to 5.1° within 2 min. PU and P123 form the switching group, which enhances the SM behavior of the composite. The shape fixity (Rf) and shape recovery (Rr) of PU/PLLA/P123 are 94.4 % and 98 % in 55 °C water, respectively, and the shape recovery time is only 10 s. P123 plays the role of “turbine” in the SM process. PU/PLLA/P123 exhibits a balance between stiffness and elasticity, and good degradability. Furthermore, PU/PLLA/P123 is also biocompatible and beneficial to cell proliferation and growth. Therefore, it offers an alternative approach to developing hydrothermally responsive SM biocomposites based on P123, PU and PLLA for biomedical applications.