The Physical State of Mannitol after Freeze-Drying: Effects of Mannitol Concentration, Freezing Rate, and a Noncrystallizing Cosolute

The objectives of this study were to (1) measure the effects of freezing rate and mannitol concentration on the physical state of freeze-dried mannitol when mannitol is present as a single component, (2) determine the relative concentration threshold above which crystalline mannitol can be observed by X-ray powder diffraction in the freeze-dried solid when a variety of noncrystallizing solutes are included in the formulation, and (3) measure the glass transition temperature of amorphous mannitol and to determine the degree to which the glass transition temperature of freeze-dried solids consisting of mannitol and a disaccharide is predicted by the Gordon-Taylor equation. Both freezing rate and mannitol concentration influence the crystal form of mannitol in the freeze-dried solid when mannitol is present as a single component. Slow freezing of 10% (w/v) mannitol produces a mixture of the alpha and beta polymorphs, whereas fast freezing of the same solution produces the delta form. Fast freezing of 5% (w/v) mannitol results primarily in the beta form. The threshold concentration above which crystalline mannitol is detected in the freeze-dried solid by X-ray diffraction is consistently about 30% (w/w) when a second, noncrystallizing solute is present, regardless of the nature of the second component. The glass transition temperature of amorphous mannitol measured from the quench-cooled melt is approximately 13 degreesC. Accordingly, mannitol is an effective plasticizer of freeze-dried solids when the mannitol remains amorphous. Glass transition temperatures of mixtures of mannitol and the disaccharides sucrose, maltose, trehalose, and lactose are well predicted by the Gordon-Taylor equation with values of k in the range of 3 to 4.