聚砜
膜
聚酰胺
薄膜复合膜
材料科学
涂层
渗透(战争)
化学工程
多孔性
图层(电子)
高分子化学
复合材料
聚合物
复合数
化学
反渗透
工程类
生物化学
运筹学
作者
Puyam S. Singh,S.V. Joshi,J.J. Trivedi,C.V. Devmurari,A.Prakash Rao,Pushpito K. Ghosh
标识
DOI:10.1016/j.memsci.2005.10.039
摘要
Thin film composite RO membranes were prepared by coating polyamide over two polysulfone membranes having average pore size distributions of 0.07 and 0.15 μm, respectively. The former TFC membrane designated as Type 1 shows superior salt rejection efficiency over that found with the latter TFC membrane designated as Type 2 (S/R = 96% for Type 1 versus 65% for Type 2). ATR-IR studies suggest a two-fold thicker skin layer in Type 1 membranes due to reduced penetration of polyamide into the pores of polysulfone whereas in the case of the Type 2 membrane the pores are plugged with polyamide but the skin layer is thinner (0.2 μm for Type 1 versus 0.1 μm for Type 2), leading to the possibility of higher degree of defects and more porous and, consequently, lower salt rejection efficiency. The higher bulk density of the Type 2 membrane in the IR penetration region accounts for the overall higher intensities of IR signals compared to those observed with Type 1, wherein the IR beam encounters greater degree of voids that yield no signal.
科研通智能强力驱动
Strongly Powered by AbleSci AI