催化作用
制氢
蒸汽重整
煅烧
烧结
甲醇
材料科学
化学工程
氢
色散(光学)
电解质
金属
无机化学
冶金
化学
电极
有机化学
物理化学
工程类
物理
光学
作者
Arielle Cristina Fornari,Raphael Menechini Neto,Giane Gonçalves Lenzi,Onélia Aparecida Andreo dos Santos,Luíz Mário de Matos Jorge
摘要
Abstract In this work five CuO‐ZnO‐Al2O3 catalysts were synthesized using the sol‐gel method, with different Cu percentages, for use in the methanol steam reforming reaction, at 300 °C, aiming to generate hydrogen for PEM (Polymer Electrolyte Membrane) fuel cells. The specific area and total pore volume of the materials decreased with increasing Cu content and consequently reduced the alumina content. Also, the area decreased with increasing the calcination temperature, due to the sintering and coalescence of Cu crystals. The metal dispersion decreased (from 32 to 4 %) with increasing the Cu amount (from 8.9 to 48.4 %). For this reaction, the catalyst with the second highest Cu concentration (40.6 %) was the most active and had the higher Cu area (34.8 m2Cu/gcat). Meanwhile, the catalyst with the lowest Cu content (8.9 %) had its active sites better used, presenting the highest turnover frequency, specific area, and metal dispersion. The experimental results indicated that there was an optimum composition for the catalyst, which would provide the best area and dispersion for the reaction, with a view to industrial application. This composition was statistically calculated to be 33 % (g/g) of Cu.
科研通智能强力驱动
Strongly Powered by AbleSci AI