热电效应
材料科学
有效质量(弹簧-质量系统)
热电材料
兴奋剂
声子散射
声子
微观结构
凝聚态物理
电子能带结构
固溶体
散射
光电子学
纳米技术
热导率
热力学
复合材料
冶金
光学
物理
量子力学
作者
Bingchao Qin,Xuegao Hu,Yang Zhang,Haijun Wu,Stephen John Pennycook,Li‐Dong Zhao
标识
DOI:10.1002/aelm.201900609
摘要
Abstract Solid solution alloying is one of the quite powerful approaches to enhance thermoelectric performance because it can simultaneously optimize electrical and thermal transport properties. Herein, a comprehensive investigation on p‐type PbTe‐PbSe‐PbS alloys is reported, in which the carrier concentration is fixed with 2 mol% Na doping. High thermoelectric performance is achieved via synergistically tuning carrier concentration, manipulating electronic band structure, introducing nanostructures, and separating phases. Thus, a high ZT value ≈1.9 is obtained in (PbTe)1−x(PbSe)x alloys, which show both higher Seebeck coefficients and lower lattice thermal conductivities contributed from enlarging band effective mass and scattering phonons, respectively. The obtained results are well confirmed by microstructure characterizations and theoretical calculations based on the single parabolic band (SPB) model and Callaway model. Besides, ZT values ≈1.8 and 1.2 are achieved in (PbTe)1−x(PbS)x and (PbSe)1−x(PbS)x alloys, respectively. Based on the obtained thermoelectric performance from the selected compositions between two or three end‐members (PbTe, PbSe, and PbS), the thermoelectric performance distribution maps for the PbTe‐PbSe‐PbS alloys are established. This comprehensive investigation can provide the performance prediction on any composition within the performance maps of (PbTe)1−x−y(PbSe)x(PbS)y alloys.
科研通智能强力驱动
Strongly Powered by AbleSci AI