Preparation of silicon carbide ceramic slurry for stereolithography based additive manufacturing

Stereolithography-based additive manufacturing of ceramics has received tremendous attention in academic and industrial communities. In order to fabricate silicon carbide (SiC) components with complex shapes by stereolithography, a high SiC loaded ceramic slurry with low viscosity and excellent curing ability is required. However, it is challenging to meet these slurry requirements. In this work, the effects of resin formulation, dispersant, particle size, solid content and ball milling time on the properties of SiC ceramic slurry were systematically studied. The SiC slurries were prepared by using four precursor SiC powders having different particle sizes and modified by high temperature oxidation to reduce its UV absorbance. Additionally, the suitable SiC slurries for stereolithography were prepared by ball milling under appropriate processing parameters, and the geometrically complex SiC green bodies were subsequently fabricated.