Corrosion Behavior of Ti3SiC2 in Flowing Liquid Lead–Bismuth Eutectic at 500 °C

MAX phases are promising candidate structural materials for lead-cooled fast reactors (LFRs) and accelerator-driven sub-critical systems (ADSs) due to their excellent corrosion resistance in liquid LBE. In this work, one of the typical MAX phases, Ti3SiC2, was exposed to the flowing LBE with a saturated oxygen concentration at 500 °C for up to 3000 h. The corrosion behaviors, including the evolution of the corrosion layer, mechanical properties and wettability, were evaluated via X-ray diffraction, a scanning electron microscope equipped with an energy-dispersive X-ray, a microhardness test and contact angle measurement. The results reveal that a corrosion structure with a duplex layer was formed on the sample surfaces. The outer layer was a diffusion layer, which always remained thin (<3 μm) during the whole test due to the erosion effect caused by the flowing LBE. The inner layer was the stable protective oxide layer, and its thickness increased with exposure time. The growth of the corrosion structure improved the microhardness and reduced the wettability with regard to LBE, which was beneficial to inhibiting further surface corrosion of Ti3SiC2.