Cross-linked chitosan-epichlorohydrin/bentonite composite for reactive orange 16 dye removal: Experimental study and molecular dynamic simulation

Chitosan/bentonite beads (CsB) composites were prepared from chitosan (Cs) and bentonite (B) and cross-linked with epichlorohydrin for removal of reactive orange 16 (RO16) and methylene blue (MB). The adsorption results have shown that the (Cs20B80), 20 % wt of (Cs) and 80 % (B), was selected as the best adsorbent for (MB) and (RO16) dyes. SEM, EDX, FTIR, BET, and pHpzc were implemented to investigate the features of Cs, B, and Cs20B80 samples. The influence of contact time (0–72 h), initial RO16 concentration (15–300 mg/L), temperature (30, 40, and 50 °C), the quantity of adsorbent (1–4 g/L), ion strength (0.1–1 M), and solution pH (3–10) on RO16 adsorption onto Cs20B80 were explored. The pseudo-second-order and the Langmuir models fit adequately the adsorption kinetic results and the isotherms ones respectively. Also, the maximal monolayer capacities calculated using the non-linear form of the Langmuir isotherm are 55.27, 55.29, and 70.80 mg/g, at 30, 40 and 50 °C. Based to the statistical physics model, the RO16 could be retained on the surface of Cs20B80 through a non-parallel orientation. The RO16 adsorption process is endothermic and natural, as demonstrated by thermodynamic studies. After three regeneration cycles, the Cs20B80 composite has shown an adsorption capacity of around 20 % compared to the initial one. The adsorption energy of RO16 onto Cs, B, and Cs20B80 examined using the Monte Carlo simulation method (MC) ranged from −164.8 to −303.7 (kcal/mol), showing the potential of the three adsorbants for RO16 dye. Also, the process of adsorption of RO16 dye on the surface of Cs20B80 composite indicates several kinds of physical interactions, involving electrostatic interaction, hydrogen bonding, and π-π interactions, this finding was proved theoretically via molecular dynamic simulations.